The wide application of stainless steel sinks has established its leading position in the market. Although the stainless steel sink and ceramic or other material than the sink had many deficiencies, but its light, wear resistance, easy cleaning, high temperature resistant, not easy to aging, corrosion, non oil, no water, no dirt and no odor, durability and other characteristics, so it is still the mainstream of the international tank.

The brain will tell you how to choose a good stainless steel sink!!

How to choose a high quality sink

1. thickness. The thickness of stainless steel trough should be chosen between 0.8 and 1.0mm. In this thickness, 304# stainless steel should be chosen to make the tank have toughness, and the damage caused by impact can be avoided to the utmost extent. The easiest way is to press the surface of the tank a little harder, and if you press it down, it means the material is thin.

2. degree of thinness. Light thin Qiao thin edge not only makes the washing room sink the maximum and minimum dimensions are unified, and spilled water also can easily wipe the sink into the sink.

3. weight. Stainless steel is a kind of ferroalloy, the proportion of steel is 7.87, which adds nickel, chromium, heavy metals, the proportion of these metals larger than steel, so the weight is heavier. Counterfeit inferior stainless steel, such as steel plate chromium plating components lighter.

4. process. The process of stainless steel tank has welding method and integral forming method. Welding method is divided into two ways, one is the basin and panel welding welding together, its advantages are beautiful appearance, after strict processing, it is difficult to find the welding mouth, the water tank surface is straight and smooth, the disadvantage is that some consumers doubt its firmness. In fact, the welding technology mainly has the most advanced CNC arc welding and resistance welding, the quality of clearance; another is the two single pot butt welding into one of the butt welding, the advantage is with basin as a whole panel of stretch forming, sturdy and durable, its shortcoming is easy to see that the welding traces, the smoothness of the poor.

A molding production process is advanced also welcomed by consumers, but the production process is difficult, the overall thickness and comparison sink after forming unevenness, thin, is about 0.7mm, the thickness of the basin better should be in 0.8 - 1.0mm, is not as thick as possible, the more the material thickness is too bulky to sink. The cabinet body deformation, also damage the tableware utensils, 0.8 - 1.0mm is the best thickness, long service life, the vessels will also get security.

Generally speaking, the stainless steel trough with integral forming method is better than the welding method, and the first-class trough is usually produced by one stamping method. Of course, there are low-end products in the famous brand, and many welding methods are used.

5. depth. The height of the water tank suitable for domestic use is above 180mm, and the advantages are large capacity and splash proof.

6. surface smoothness. It is the most intuitive standard to test the quality and grade of the flume. The line of sight is consistent with the plane of the flume. The edge of the flume should not be raised and not warp, and the error is less than 0.1mm. Flatness is not good, in addition to affect the appearance, but also easy to cause leakage and fouling phenomenon.

7. accessories. Drain and sewer pipe quality directly affect the use of the sink, good pipe material should be PP or UPVC material, high degree of sealing, elastic, heat insulation, anti cracking, long service life, reasonable shape design, with deodorant, anti odor design, easy installation, no blockage and leakage phenomenon.

The water inlet has steel ball positioning, extrusion type sealing and platform controlled water removing, which has strong sealing, convenient and fast storage of water, can automatically filter impurities, avoid clogging the water pipe, use high quality rubber, and is not easy to wear.

The fastening seal is fastened with self tapping screw to ensure the seal, and the operation is safe and quick.

8. noise elimination. The bottom of the flume usually has a noise pad or silencer coating, which has the function of preventing seepage and leakage.